HOW TO CORRECT HARDWARE onboard OFF

Onboard hardware on the motherboard there is a simple and practical. Hardware such as souncard, VGA, LAN cards et al, already integrated in the motherboard. So that users no longer need to add the hardware is already available (read practical).

Although the hardware is practical, but it is a bit complicated when it's not working. Unlike the hardware that is not onboard, it can be replaced if damaged. But wait, the onboard hardware is actually connected directly with the system BIOS on the motherboard. Therefore, alau not work should not assume that he had been damaged. Try first to do the following steps:

1. look for a named CLEAR CMOS jumper. Usually located near barterai.
2. position the jumper is in position CLEAR CMOS.
3. Salama wait 5 seconds
4. return the jumper to its original position (NORMAL).

After that turn on the computer and check hardware problems earlier.
If the above works, we know the hardware is not functioning before the system is switched off by Bois. But if still not functioning well, meaning there is a possibility it was already broken harware.

So, hopefully this article useful.

Simak

Baca secara fonetik

Beri peringkat terjemahan