Cara Mudah Reset Printer Canon IP 2770

Printer canon IP 2770 begitu diminati di Indonesia, ini karena harga dari Canon IP 2770 sangat terjangkau, yaitu di kisaran 600 ribu s/d 700 ribu, selain itu IP 2770 ini memiliki hasil cetakan yang bagus dan rapi, fasilitas mantenance di canon Ip 2770 pun sangat komplit, mulai dari head cleaning sampai dengan papper set.

Walaupun demikin Seri Ip 2770 ini justru tidak lebih baik dari printer canon seri sebelumnya, seperti Ip 1980 atau 1989 dari segi ketahannan mekanin ataupun catridgenya. hal ini bisa dimaklumi karena harga dari IP 2770 cukup stabil dan masih sangat terjangkau, ditengah melambungnya dollar terhadap rupiah.

ketika IP 2770 ini dioperasikan untuk mencetak dalam jumlah yang banyak, biasanya Ip 2770 ini akan mengalami error yang ditandai dengan blink sebanyak 4 kali atau blink 8 kali yang menandakan Printer Ip 2770 ini memita untuk di reset, untuk itu berikut langkah - langkah untuk mereset IP 2770 secara manual :

1. Pastikan bahwa Printer Canon IP 2770 anda dalam keadaan off (Mati) Namun kabel power (listrik) terpasang.
2. Tekan tombol RESUME selama kurang lebih 5 detik.
3. Setelah itu Anda tekan tombol POWER sampai lampu hijau nyala (saat menekan tombol POWER, tombol RESUME jangan dilepaskan dulu)
4. Kemudian lepaskan tombol RESUME, namun jangan lepas tombol POWER. Sambil tombol POWER masih tertekan, tekan tombol RESUME 5 kali. Led akn menyala bergantian orange hijau dgn nyala terakhir orange. (Jangan hingga keliru 4x karena printer akan mati total, tetapi sifatnya sementara juga).
5. Lepaskan kedua tombol secara bersamaan.
6. Led akan blink sebentar setelah itu akn nyala HIJAU.
7. Komputer akan mendeteksi device baru, abaikan saja.
8. Keadaan ini menunjukkan printer IP 2770 dlm keadaan SERVICE MODE serta siap direset.

Silahkan terlebih dahulu Download Software Reset Printer Canon IP2770 DISINI

1. Pada menu Absorber clear ink counter pilih Main kemudian klik SET di sebelah kanannya.
2. Pada menu Ink Absorber counter pilih Main kemudian klik SET di sebelah kanannya. 
3. Kemudian klik EEPROM. maka printer akan cetak 1 halaman. 
4. Selesai. 

Demikian cara  Reset Printer Canon IP2770 dan juga bisa anda gunakan untuk Canon IP2700, semoga dapat bermanfaat dan printer kembali normal.

read more...

Menganalisis Kode Error di Printer Canon Ip 2770 Serta Solusinya

Printer canon IP 2770 bisa di sebut printer sejuta umat di Indonesia. hal ini dikarenakan IP 2770 selain harganya terjangkau, kualitas cetakannyapun sangat baik. Selain itu IP 2770 cukup mudah untuk diisi ulang atau refill, sehingga IP 2770 ini lebih hemat didalam operasionalnya.

Walaupun demikian printer IP 2770  ini tak jarang mengalami error, baik itu ketika mengalami kerusakan ringan maupun berat. Kita sebagai pengguna tentunya harus memahami error Ip 2770 ini, sehingga kita tidak harus membawanya ke servis center kalau kerusakannya hanya ringan.

Sebelum memahami berbagai kode error di IP 2770, ada baiknya kita mengetahui beberapa tips mengoperasionalkan printer IP 2770 ini agar lebih awat dan tahan lama. Berikut adalah beberapa tips menjalankan printer Canon Ip 2770 :

• Tidak lebih dari 20 lembar dalam sekali cetak, Maksimal dalam 1x cetak adalah 20 lembar.
• Tidak mencetak foto dengan higt printer karena cartridge mudah jebol 
• Jangan telat mengisi tinta cartridge karena mudah kering dan macet.
• Tutup kembali pada tutup kertas jika sudah tidak digunakan agar tidak ada kotoran yang masuk kedalam printer.
• Jangan sampai jatuh dari ketinggian.
• Jangan sampai terkena air.

Setelah kita menjalankan tips mengoperasionalkan IP 2770 agar awet dan tahan lama, berikut adalah berbagai kode orror di Printer Canon Ip 2770 serta solusinya :

No	Kode Eror	Penyebab	Cara Mengatasi
1	3x blink Orange 1x hijau	Terdapat kotoran pada bagian dekat roller , bisa juga karena mekanik yang rusak.	Silahkan bongkar printer ( jika sudah tidak bergaransi , kalau masih bawa saja ke service center tempat Anda membelli printer ) cek apakah ada benda asing yang menyumbat, perbaiki atau ganti mekanik.
2	4x blink Orange 1x hijau	Wante Ink Pad Full	Reset Printer pake software
3	5x Blink Orange 1x Hijau	Cartridge Hitam atau Warna yang Rusak	Cek cartridgenya , bersihkan chip cartridge pake tisu mungkin kotor terkena tinta yang menyebabkan tidak konek , Bersihkan dulu chip cartridge dengan tisu basah lalu keringkan dengan tisu kering, kalau tetap g bisa , ganti cartidge.
4	7x Blink Orange 1x hijau	Cartridge yang Warna Rusak/ mati	Ganti Cartridge Warna
5	7x blink Orange dan hijau secara bergantian	Waste Ink Pad Full , Ink Absorber Full	Pertama  untuk printer yang tidak diinfus / diinfus tp tidak diberi pembuangan , bersihkan busa penyerap tinta pada bagian bawah printer / bisa juga diganti , lalu reset printer menggunakan software resetter.
6	8x Blink Orange 1x Hijau	Ink tank full	Reset printer menggunakan software resetter
7	13x / 16x blink Orange 1x hijau	Cartridge tidak terpasang dengan baik , pada saat nge print muncul gambar cartridge seperti terlepas ke atas pada layar monitor anda.	Tekan dan Tahan Tombol Resume ( di bawah tombol power ) kurang lebih 10 detik.
8	14x / 15x Blink Orange 1x Hijau	Cartridge Hitam Rusak, chip cartridge atau mati.	Bersihkan dulu chip cartridge dengan tisu basah lalu keringkan dengan tisu kering, jika masih tidak bisa baru Ganti Cartridge Hitam.

Itulah beberapa tips serta arti error code pada printer Canon IP 2770

read more...

Cara Ampuh Membasmi Virus Hidden Folder Dengan Aplikasi HFV

                                                                                     
                                                                             image source : www.google.com










Sebagian dari kita pengguna komputer mungkin sudah pernah mengalami dimada pc atau laptop kita terserang virus hidden folder, dari pengalaman saya yang juga pernah mengalaminya, virus ini cukup menjengkelkan walaupun sebenarnya tidak terlalu membahayakan bagi sistem operasi pada komputer kita.

Virus ini hanya menyembunyikan file pada flashdisk atau media penyimpanan  kita yang lain, dan tidak terpengaruh untuk file yang ada pada hardisk atau storage komputer kita, ini terjadi karena inti virus atau aplikasi perintah hanya terdapat pada flash disk, setelah virus ditularkan lewat komputer. Ada beberapa cara di dalam menangani virus ini diantaranya adalah dengan perintah "attrib" yaitu memunculkan folder yang tersembunyi, atau dengan menggunakan antivirus seperti avast atau avira atau beberapa antivirus lokal. Akan tetapi dari pengalaman saya untuk yang versi free tidak bisa mengatasi virus ini.

Virus ini cukup cepat dalam penyebarannya, ketika kita atau teman kita menghubungkan flashdisk atau media penyimpanan lainnya virus ini langsung bereaksi, dan dalam sekejab seluruh file kita dalam flashdisk berubah menjadi shortcut. Menurut info yang saya dapat dari google virus ini sendiri merupakan virus Geek atau virus dengan tipe WIN 32 Atraps-PZ [Trojan]

Sekiranya cukup pendahuluan saya, mari kita bahas cara membasmi virus tersebut dengan aplikasi HFV, inti permasalahannya adalah file shortcut menciptakan semacam backdoor pada sistem komputer sehingga dapat membahayakan data pentin ketika terhubung dengan internet, karena komputer kita bisa tersusupi oleh hacker yang memprogram virus tersebut.

Dengan menggunakan aplikasi HFV kita dapat langsung menghapus inti virus atau program perintah pada media penyimpanan atau flash disk kita, dari pengalaman saya aplikasi ini paling ampuh karena setelah di scan shortcut langsung hilang dan dan data file kita langsung muncul kembali , lebih okenya kita tidak perlu menscan computer kita, virus ini tidak mucul lagi ketika kita colokkan kembali flash disk kita kembali kedalam komputer, inilah yang menjadi dasar kesimpulan saya bahwasannya inti virus tersebut terdapat pada flash disk itu sendiri. Akan tetapi kita juga harus menginstal antivirus yang update untuk pencegahan pada sisi komputer kita.

Berikut link untuk mendownload aplikasi tersebut : DOWNLOAD HFV APLICATION

Penggunaan aplikasi ini sangatlah mudah kita tinggal mendownload aplikasi tersebut kemudian klik 2 kali untuk menjalankannya, kemudian kita arahkan destenisinya ke flashdisk kita yaitu dengan cara kita klik add
, kemudian kita tinggal klik delete virus untuk menghilangkan virus kemudian kita klik unhide file untuk memmunculkan file kita yang tersembunyi, taaadaaaa...  shortcut yang terdapat pada flash disk kita pun hilang dan file kita yang tersembunyi kembali muncul.

Demikian artikel saya mengenai virus shortcut hidden folder, semoga membantu, teman - teman yang komputernya terserang virus tersebut. ada baiknya aplikasi ini disebarkan pada teman atau keluarga baik dikantor maupun dirumah, sekian terima kasih.

read more...

How to fix computer part III - BIOS Problem

BIOS ProblemsSymptoms:Be careful in Bios Update, as he got the wrong update your BIOS version, the PC so no way you can not even get into the BIOS. 

Solution:Usually Update can not be undone, only certain type of motherboard that has a backup BIOS chip it, there is saved the original BIOS types that can not be removed, to be able to restore your stay special Jumper Position move that usually have no instructions in the manuals. Then hidupka PC and wait 10 seconds, the original BIOS on Restore, restore Jumper position on the starting position, and the PC is ready to run again. If the motherboard does not have pasilitas, the BIOS chip should be sent to the manufacturer, type your BIOS can see in the manuals. Be careful not to install the BIOS IC legs broken or inverted position. 

Symptoms:CPU Beep sound in the speaker a few times and there is no display to the screen, when the monitor is not problematic. 

Solution:Beep Beep indicates a specific error message from the BIOS, it shows the type error Beep what happens on the PC, usually an error on non-detectable Memory, VGA Card, which is not installed properly, even Processor Monitor data cable could be the cause. Please check the problem.
The following BIOS error message:Sound errors are usually not all motherboard BIOS the same error signal depending on the type of BIOS.[AMI BIOS] 

Beep 1x: RAM / Memory not installed or Damaged Good, Beep 6x: Gate A20 Error - Indicates damaged or IC Keyboard Gate A20 of his own, 8x Beep: Grapihic Card / VGA Card is not installed properly or Damaged, Beep 11x: Checksum Error, check Bios Batre, and replace with new.[AWARD BIOS] 

1x Long Beep: RAM / Memory not installed or Damaged Good, Beep 1x 2x Short Length: Damage At Graphic Card (VGA), can also check on the installation of slot does not fit (not entered), Beep 1x 3x Short Length: Keyboard failure or not installed. No beep interrupted / continuous sound: RAM or Graphic Card not detected. 

CMOS Batrey Damaged / WeakSymptoms: CMOS Checksum Message Appears Vailure / Batrey Low, due to tegangna which supply IC CMOS / BIOS is not normal because batrey weak, so that the BIOS settings back to factory default Default-nya/setingan, and hardware configuration should be in Reset. 

Solution: Replace Soon his Batrey 

Symptoms: The CPU is often Hang? 

Solution: There are several factors including the hanging occurred: There BadSector on the hard drive, Viruses There, There is a problem in hardware such as Memory Dirty / Damaged, Mboard Dirty / Damaged, Fan Cooling fan rotation was already weak, unstable power supply ... .. should not be forced to use because it will result in more fatal, please contact: us to be able to resolve the issue 

Symptoms: The computer is often what causes the blue screen appears? 

Solution: The message could be caused Blue Screen windows system is broken, Can of Memory, Can from 

the hard drive, can be from other components, depending on the blue screen message is displayed. 

Symptoms: The computer is so much slower than before, though initially not so slow 

Solution: The cause of the process is slow your computer there are several factors: Space hard disk is too full, too many programs / software that is consuming disk space and memory, there is a virus, hard drive badsector.

read more...

How to fix computer part II - Harddisk , CD Rom , and floppy disk

Damage On Harddisk 

Solution:

Check the voltage cables and data cables into the hard drive is loose, should be tightened, then turn and let you listen to what came out of a normal hard disk, if not normal means damaged hard drive controller. 

Symptoms:

The CPU time started and then did post after it appeared the message "Operating system not found". 

Solution:

There is a possibility Operating system corrupted, can be overcome by re-install the OS or if you are using Windows 2000/XP there Repairnya facilities. or there is likely also to your hard disk is not detected and do the aboveSymptoms:hard disk bad sector? 

Solution:

There are several factors that cause bad sectors among others, the voltage is unstable, often decided by a sudden flow of electricity, after pemakaina not shot down, consumption is too long, there are 2 kinds of bad sector physical and software ... .. To overcome this there are several ways, including using software to eliminate badsector .... pembahan further eBook is in computer repair methods and what you get if you join the Active Member.
Damage CD / DVD / ROM / RW & Floppy Disk 

Symptoms:

This type of damage is commonly encountered:1. Not detected in windows2. Not get out in CD3. Can not read / write / can only read it. (CD)4. Can not read / write / write protect (Floppy disk) 

Solution:

1. Check the data cable and voltage cable into the CD-floppy, check in bios setup if it is detected? should be set to auto. Check if the LED is lit, if not damage the controller.2. Mechanical damage on the rubber motor or motors.3. Usually the optical damage, but there may still be improved in a way to set the optical again.4. Gross Head, can be cleaned using Cutenbud

read more...

How to fix computer part I - Power Supply and Mainboard

If your PC often show a complex problem, or display an error message, a beep sounds continuously uniformly or irregularly, the PC is most likely being in trouble, I will provide tips and solutions to resolve the issue and your PC can function again as usual. Problems or damage arising typically categorized in two types of damage are: Problems or damage to the Hardware and Software
This type of damage can be categorized into two categories, namely:1. Damage In Hardware (Hardware)2. Damage On Software (Software)
1. Damage to the HardwareProblems with hardware components need to be serious because it is difficult handling localized and removed without proper tools, skills and experiences that support. Explanation will revolve around the problems that often occur along with how to cope.Damage In Power Supply 

Symptoms:When turned on the PC does not react to anything, there is no display on the monitor, there is no indicator light (LED) is lit, the power supply fan is not spinning, the indicator light on the monitor is not lit. 

Solution:Check whether the cable is properly connected and installed properly plug into the socket, also check that there is the on / off behind exactly behind the Power Supply is in the On position, If you are sure installed correctly but still no response to make sure you please replace the power cable with which you believe to be good. The problem occurs in the absence of incoming voltage, there is damage to the power cable. 

Problem:When turned on the PC does not react to anything, there is no display on the monitor, there is no indicator light (LED) is lit, the power supply fan is not spinning, the indicator light on the monitor turns on. 

Solution:Do as the above step, but if there was still no response means there is a problem on the Power Supply, PS Please change it, I suggest you should just replace the damaged Power Supply with a new one, and be careful in the installation.Note: If the damage is only on the Power Supply alone, When you replace it, the computer will return to work normally. Unless there is a problem in other components such as the Mother Board, VGA Card and Memory.

 

Damage in Mother BoardsSymptoms:When turned on, no display on the monitor, the indicator light (LED) on the front panel is lit, the indicator light (LED) flashing monitors, power supply fan and processor fan spins, no beep sound in speakers. 

Solution:The first step off all power cables connected to the electrical, data cable to the monitor, wired keyboard / mouse, and all cables are connected to the CPU, then cashing out all the screw covers. In an open case please also remove other components, ie the voltage of power supply cable connected to the motherboard, hard drive, floppy, be careful in the process do not hurry. Likewise with the card attached to the Mboard (VGA, Sound or Other Card). Now attached to the motherboard just cashing it. Please check carefully Motherboadnya, see Chip (IC), Elko, transistor and others whether there is a fire.If there are no signs of burnt components likely motherboard is still good, but there are times when Mother board does not work because of damage to the program contained in the BIOS 

Symptoms:The CPU time started and then did post after that process does not continue and was silent for a moment did not directly go to the operating system, and then the screen is the message 'disk error, disk Failur, after it appeared the message "press F1 to continou" after we pressing the F1 key does not enter operating system and the message "Operating system not found".

read more...

Causes Damage to HARDDISK

Hard drive is the primary data storage hardware on the computer. Without hard drive, the computer can not be used secera optimal, because it looks just the writings of black and white.

Hard disk is a sensitive hardware. There are several things that cause damage to the hard drive. But the worst was the death sudden flow of electricity, namely:

1. Lights off. The solution is to use a special adapter that can store electricity for a few minutes. So when a power failure occurs, the computer still on and there was a chance to shut down the computer safely.

2. Resset. As people think that pressing the button on the CPU resset is a small thing, but this is very dangerous to drive. The reason Katika needle hard at work, then the position was in the middle of the disc drive. And if we press the button resset, then the needle will simultaneously move to the edge of the disc and leave scratch marks then there badsector. Therefore, do not carelessly pressing the resset.

Tips just in case the computer hangs and there is no other way than pressing the button resset. Wait until the hard drive (usually red) to die, even if the flame is flashing, press the resset when the lamp is off hard drive / no light.

Hopefully this article useful. For those of you who want to add or refute the above tips, I wait in the comment box. Thank you.

read more...

problems on a computer screen and solutions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1. Images on the monitor disrupted and changed color.
Solution: Make sure the monitor connection to the PC no problem. Note also the position of the speakers, whether too close to the monitor? Therefore, the monitor is very sensitive to electro-magnetic field effect, especially TV, Radio, Fridge, and others. Mobile phones also include the cause loh.

2. Monitor turns itself off
Solutions: Try checking the settings on the screen saver. Who knew you mengestnya too fast (eg 1 minute). Also check the power outlet and the monitor cable to the PC. Make sure it is plugged in correctly and strong. Check the graphics card driver through the display properties dialog. Just right-click an empty area of the desktop, then select [Properties], then that dialog box opens. Try to match its driver graphics card you use. Open the Control Panel too. Then click on [System] [Device Manager] [Display adapter].

3. Images on the monitor appear broken
Solution: broken image problems usually associated with graphics cards. Monitor settings and memory. It's possible your graphics card is not enough to run high-resolution program. For example play the latest 3D games. Replace with a better, with greater memory capacity. Monitor settings also affect image smoothness.

4. Monitor screen black / blank account after setting display properties.
Solution: setting strongly associated with the ability to display graphics card. Moreover, if set to a larger screen area, this problem will not occur. Should set the monitor to resousi commensurate with your existing graphics card. After that, check it also can achieve the maximum setting the monitor.

5. Opaque screen.
Solution: Monitor blur / blur caused by the brightness and contrast settings that do not fit. Set to raise the numbers. If not too successfully, it may be the age of your monitor is too old. Changes in the color becomes opaque due to damage to the video amplifier circuit. Usually the image will appear clear when the PC is turned on, but after a long time will be blurry. Detect connection speed with the video raster board amplifier board.

read more...