ERROR CODE AND RESET CANON MP145, MP160

 
















CANON MP145/MP160 ERROR CODE:
E2-2 = No paper (ASF) 
E3-3 = Paper hours  
E4 = No ink / cartridge  
E5-5 = ink cartridges are not installed or installed wrong cartirdge (not compatibel)  
E8 = absorber full, or Platen waste ink absorber full reset Mita  
E9 = connection to a digital camera / video camera does not support  
E14 = Ink Cartridges Whose are wrong destination  
E15 = Ink cartridge is not installed 
E16 - Ink remaining is unknown E16-
E19 = problem on scan head alignment sheet  
E22 = Carriage error  
E23 = Paper feed error  
E24 = Purge unit error (section Cleaning the pump head)
E25 = ASF (cam) sensor error  
E26 = Internal temperature rise errors  
E27 = Platen ink absorber full waste ink absorber or full-> reset by such tools  
E28 = Ink cartridge temperature rise error -  
E29 = EEPROM error  
E33 = Paper feed position error  
E35 15 = USB Host VBUD overcurrent error - USB  
E37 17 = Abnormal motor driver 
 E40 20 = Other hardware error
E42 22 = Scanner error 

HOW reset CANON WASTE INK COUNTER MP160/MP145 Before you reset the preview there is any error message on your printer lcd: way below used to fix a printer that has a message ERROR E27 

1. Turn off the printer (make sure the power cord still attached), press and hold the STOP / RESET then press and hold down the ON / OFF and release the STOP / RESET, then press the STOP / RESET 2x 

2. Release the two buttons, now in a position SERVICE MODE printer (printer appears on the LCD digits "0") 

3. After the lights on / off button is green, please press the STOP / RESET in accordance with the following instructions:  

press 1x = Orange flame lights> for Service pattern print  
press 2x = Green lights flash> for EEPROM print  
press 3x = Orange flame lights> for EEPROM reset  
press 4x = Light Green Flame Retardant> for Waste ink counter reset 

4. Turn the printer off and unplug the POWER. 

5. Turn your printer back