Saturday, July 30, 2011

Causes Damage to HARDDISK










Hard drive is the primary data storage hardware on the computer. Without hard drive, the computer can not be used secera optimal, because it looks just the writings of black and white.

Hard disk is a sensitive hardware. There are several things that cause damage to the hard drive. But the worst was the death sudden flow of electricity, namely:

1. Lights off. The solution is to use a special adapter that can store electricity for a few minutes. So when a power failure occurs, the computer still on and there was a chance to shut down the computer safely.

2. Resset. As people think that pressing the button on the CPU resset is a small thing, but this is very dangerous to drive. The reason Katika needle hard at work, then the position was in the middle of the disc drive. And if we press the button resset, then the needle will simultaneously move to the edge of the disc and leave scratch marks then there badsector. Therefore, do not carelessly pressing the resset.

Tips just in case the computer hangs and there is no other way than pressing the button resset. Wait until the hard drive (usually red) to die, even if the flame is flashing, press the resset when the lamp is off hard drive / no light.

Hopefully this article useful. For those of you who want to add or refute the above tips, I wait in the comment box. Thank you.
read more...

HOW TO CORRECT HARDWARE onboard OFF











Onboard hardware on the motherboard there is a simple and practical. Hardware such as souncard, VGA, LAN cards et al, already integrated in the motherboard. So that users no longer need to add the hardware is already available (read practical).

Although the hardware is practical, but it is a bit complicated when it's not working. Unlike the hardware that is not onboard, it can be replaced if damaged. But wait, the onboard hardware is actually connected directly with the system BIOS on the motherboard. Therefore, alau not work should not assume that he had been damaged. Try first to do the following steps:

1. look for a named CLEAR CMOS jumper. Usually located near barterai.
2. position the jumper is in position CLEAR CMOS.
3. Salama wait 5 seconds
4. return the jumper to its original position (NORMAL).

After that turn on the computer and check hardware problems earlier.
If the above works, we know the hardware is not functioning before the system is switched off by Bois. But if still not functioning well, meaning there is a possibility it was already broken harware.

So, hopefully this article useful.
Beri peringkat terjemahan
 
read more...

TIPS TO MAINTAIN EFFICIENT MOTHERBOARD












As hardware require air supply, the motherboard is always in contact with the outside air. The benefit is to reduce the heat generated by cipset. The motherboard can be damaged if the temperature is too high. Therefore, the supply air should flow well as a way of caring for a good motherboard.

But please note, not necessarily free to air free from dust. It could be the incoming air to the CPU carrying dust and stick to the motherboard. Dust on cipset can be dangerous when on leave. The reason is because the dust can withstand the heat so the temperature at cipset could have been higher. And this could have been made ​​cipset on the motherboard burned.

Therefore, the placement of the CPU should be noted, as much as possible put in place far from the dust. Besides the motherboard should also be treated by minimal cleaned once a month using a soft tool like a brush, cloth and so on. Age motherboard can last a long time if ever in treating this motherboard, it should be done properly and regularly.
read more...

Tips Storing Data Safe from Viruses













Storing data is an activity that must and should be done by computer users. Typically data is stored on a hard drive such as hard disks, floppy disks, flash etc.. But what if the data stored was attacked by a virus? This is a big problem.

Currently the development of virus became increasingly. But we also must respond intelligently. One is by using an antivirus. But the weakness of this antivirus is sometimes attacked by a virus that data can not be saved. Therefore, here are some tips on how to store data to be safe from viruses. And I think these tips are very suitable for storage on the flash.

First. Compres data we want to save to flash using winzip or winrar. Because the virus can not infect the files contained in the *. zip file.

Second. Keep the data (especially for a set) you with formant *. txt, the way is to go into notepad, then input the results of typing and save. The virus could not infect files with *. txt format

Third, store the data in html format, the way is by clicking save as a document, and change its file type to html.

That's a little tips on how to safely store data from virus attacks. May be useful.
read more...

How to Fix a non-functional Printer












Repairing a malfunctioning printer can indeed cost quite a bit. Most computer users not knowing how to fix a malfunctioning printer.

Printers that are dead can indeed be said to have suffered damage. And one solution is to be fixed to a handyman service. But this time I'll share a little story of what if the printer is alive but will not work. Here's the solution I was grouped according to the problem.

1. Normal printer but do not want ngeprint.
Here are the steps to overcome this problem.
- Check whether the power and data cable is connected properly
- Check the printer driver is already installed on the computer. The trick to open the CONTROL PANEL>> Printers and Faxes.
- If the driver is installed but still does not want ngeprint, try to return to the CONTROL PANEL>> ADMINISTRATIVE TOOLS>> SERVICES. After that search code print spooler and click RESTART THE SERVICE.

2. Printer Lights Blinking
There are several possibilities why the printer lights blinking, including:
a. No paper during the print process starts, the solution is simply input the paper and press the power button or the next door.
b. Ink cartridges run out or need to be in Reset

c. There is a piece of paper stuck inside the printer. The trick to remove the paper and press the power button.

The second above problem is a common printer problems. And fix the printer with both the above problems we can do with yourself.
read more...

Friday, July 29, 2011

PC Quick Tips Creating The Not Noisy














Creating a PC with an unusually high rate is a matter of course. However, how to create a PC that is not only fast, but also no sound noisy?
Has a set of PCs with high speed is a dream for all PC enthusiasts. With high-speed PCs, of course, you can do the job and what activities are desired. For you fans of gaming for example, activities to play the latest 3D games like Doom 3, FEAR or Call of Duty 2 will be very interesting with characters that move is smooth and does not seem broken. Likewise if you are a worker in graphic arts, graphic processing applications can run more smoothly and quickly without any distractions which means delay.
All that you can do if using a PC with high speed which must be supported also by other devices such as VGA, RAM, and processor. Besides being used for play and work, you can also create an entertainment center all-in-one in one house, it's good to see television shows, view DVD movies, and listening to music. Requirement is just one, you are required to have a PC devices that have a high speed, but in addition to the speed of the featuresMore also needs your attention.
Currently if you have a minimum budget of U.S. $ 600 or about Rp5.400.000, was able to assemble a gaming PC with a fairly high speed (in this case we compare to PC gaming PC graphics). However, at that price you will not get spesifi cation and the same performance in the computer's built-up. Therefore, we suggest that as much as possible to assemble your own PC. With the composition of the right components, you will get a reliable PC at an affordable price. Here are examples of the composition of components with satisfactory results.
Use the AMD Athlon 64 processor 3000 + (Socket 939), was chosen because of price and performance ratio is pretty good compared to others. Motherboard select air-nForce 4 SLI chipset, 1 GB of RAM to use (2 x 512 MB dual-channel) and air-chipset video card GeForce 7600 GS. For other enhancements, such as sound card, onboard sound card was in fact sufficient, but if you want better sound quality, can choose the Sound Blaster Audigy 2 Value.
Storage media select the minimum capacity of 40 GB, because the games now greedy for space (one game after installed capable of up to 4 GB). Optical Drive where you can choose products from Lite-On, try to choose the type of combo drive. The latter is the case, for example, you can choose the Antec Sonata II with PSU (power supply unit) of 450 watts. With the example of the composition like that, you can already play the most demanding 3D game available today is FEAR, although with limitations here and there.
Fast and Silent
Can mean a quick and quiet. A super-fast PC is definitely not spared from noise removed from the casing. Many factors can cause noises that are quite disturbing. Either the sound was coming from the fan casing is too big, PSU fan, processor and fan heatsink VGA heatsink fan, or even the noise is caused by shocks during hard work.
In the rubric "Cover Story" this time we will try to provide some guidance for creating a fast PC, but does not remove the noise. Especially if you put the PC close to your bed. This guide will be divided into several sections, among others pulled nai several types of supporting components are recommended, if you plan on buying a new PC components such as VGA, CPU Cooler, and the processor.
In another section, we will provide guidance to optimize the capabilities of existing components, such as setting the clock on the processor, replacing both the fan heatsink to the processor and video card, optimizing drivers and applications, as well as the addition of other materials such as foam for acousti-Pack can muffle the noise in the casing.
After following the guidance from us, it is expected you are able to create a PC with high speed, but with a low noise level.
Maybe after Lebaran your THR remaining money or for those who are still students and students acquire the excess allowance during Eid, it may be time you have a superfast PC and not noisy that you've dreamed of.
Suggested Components
1. Video Card: Select the Use Passive CoolingToday almost all manufacturers have a video card with passive cooling products. But of course, not all passive cooling can be applied to products that use high-end chips, because chips with a class like that tend to cause a fairly high heat so it is not enough if it just cooled using passive cooling only. For video cards with the use of high-end chip, we recommend you use a cooling system with water cooling. Obviously if you can buy a high-end video card, buy a cooler with water cooling system will not be a problem anymore for you.
Losses from passive cooling: Because of its design which tends to be quite large and take place within the casing, then indirectly affect the circulation of air inside the casing to be disrupted so that the exhaust fan in the casing must work extra. Because of its design, the passive cooling systems are usually also close some existing slots in the next slot on the motherboard so it can not be enabled.
2. PSU (Power Supply Unit) with Large FanCurrently some manufacturers already have products PSU PSU with big fan measuring 12 cm, but despite the large level of noise generated is very small (low noise). We just take the example of products from AcBel, Silentmaxx, and Silverstone. But, of course you have to make up for the price is quite expensive (the cheapest prices around $ 142). For business this PSU, you simply provide a PSU with a capability of 450 watts power rating because of the power rating for that you can use SLI or Crossfire technology.
If you want to be more frugal, you can buy a chassis that already include a PSU in it. Casing which has a PSU with a good performance and low noise level is Antec Sonata II.
3. Processor: Choose a type Mobile TechnologyYou can choose one of two types of processors that can be used, AMD Turion 64 (X2) or Intel Core Duo, the two types of processors are commonly used in notebooks. Today's processor type of mobile work more efi cient than the desktop type processor.
In addition to the required voltage needs a little more, this mobile processor type does not generate heat that is too large so that the task of the heatsink and fan is not too heavy. You can choose a variant of the Ultra Low Voltage Core Duo, the L2300 and L2400 in which both offer very little power consumption. You also can choose the processor from AMD, namely MT-28 Turion 64 and Turion 64 MT-30.
Customize your motherboard also that you will buy with the processor. If possible select a motherboard with passive cooling which uses heatpipes on both its chipsets. Indeed, the price will be slightly more expensive if you use a mobile motherboard and processor type. However, the performance of a given course will be worth the price.
Create a More Quiet PC
4. Lower the clockspeed ProcessorThe way it is the easiest and most effective way to reduce the noise coming from the fan heatsink. If your motherboard BIOS has a feature to change the frequency of the processor clock speed, you could lose a little of his speed clock frequency. That way the heat from the processor will be reduced so that the job of the processor fan heatsink will be lighter, then automatically generated voice will be more peaceful.
But by using this way, the ability of your PC will not be maximum and tends to decrease. You can just choose, like your PC is capable of full and maximum, but the noises are quite disturbing, or ability of your PC down a bit and not making a sound noisy.
If you intend to change the frequency of the clock speed of your processor, enter the BIOS menus (usually by pressing DEL). Then go into the menu "Advanced", then select the "CPU Configuration" and "CPU FSB Frequency".
Here you can change the FSB (Front Side Bus) clock that affects the performance of a processor. To this change the FSB value in it is usually worth between 100-266 MHz, scaled up to a maximum of 25% from its default value.
When finished changing the FSB it, press F10 to save it in the BIOS and then restart your PC. After the restart process is complete, your PC will decrease performance, but of course there was no noise coming out of its processor heatsink.
5. AMD Athlon 64: Using Processor Driver and BIOS FeaturesIf you have an AMD Athlon 64 processor, then to eliminate the noise caused by the fan heatsink will be able to overcome easily. Because at some air-AMD platform motherboard already supports a feature called AMD Cool 'n Quiet Technology. Features of this one was not known by the novice computer user, but if you enable this feature, the addition can be issued to regulate voltage processor, this feature can also reduce the heat from the processor automatically.
In the BIOS default settings, this function is disabled memangselalu. To activate it fairly easy, first go into the BIOS and select "Power Management", replace the option "AMD Cool 'n Quiet" to be enabled. After that, save and restart your PC.
Another way is to install the drivers and applications for AMD Athlon 64 processor. Applications and drivers that you can get on the official website of AMD, but usually the motherboard manufacturer has always sat well include the application and the driver is in the sales package.
When finished installing, perform the setting of his energy option, change into the "minimum energy consumption." The function is the same as if you enable AMD's Cool 'n Quiet Technology in the BIOS.
6. CPU Cooling DeviceCPU Cooler is one important component that if not addressed will cause a very annoying voice. Currently the market has been circulating cooling devices from starting a low-end to high-end class that already apply water cooling system.
By the time we buy a new processor, then in the sales package will certainly include a cooling device is also standard. Usually the only cooling device using the material of aluminum, because it is intended for the use of standards and not to use overclocking.
One reason why the only cooling device using aluminum alone is the cost of production tend to be small. Material from the cooling device is a good use of copper (copper) which are equipped with heatpipe, but of course the production costs incurred will be very large if the cooling device with the material has become standard from processor sales package.
Replacement of cooling devices must you do if you own standard cooling devices have started to sound noisy. The noise usually comes from fans that the extra work because the processor cause excessive heat, in which the cooling device made of aluminum are usually not able to absorb maximum heat.
Materials such as copper cooling device (copper) which are equipped with heatpipe highly recommended here, because in addition to absorbing the heat well enough, fans of the cooling device with materials has been equipped with temperature sensors, so if the heat generated by the processor only slightly, then the fan will not spin too fast. Conversely if the processor overheats, the fan will adjust.
Some examples of cooling devices that we worked pretty good value, both in terms of absorption of heat from the processor and cooling fan noise level of devices, among others, Arctic Cooling Silencer 64 Ultra TC is used for processor or AMD Athlon 64 X2 for Socket 754 and 939. Cooling device costs about U.S. $ 20. As for the Intel Pentium 4 socket 478, Arctic Cooling Super Silent 4 Pro TC could be an option at a price of around U.S. $ 19. For socket 775 cooling devices that you can consider is the Arctic Cooling Freezer 7 Pro that can be obtained for U.S. $ 34. The prices obtained from the official website.
But in his official site, some of the cooling device has been discontinued (discontinued), which still produced only Coolong Arctic Freezer 7 Pro. But, of course, to the market in Indonesia several cooling devices can still be found. Some things to remember if you want to use the cooling device is a weight in the range of 400 grams can make dudukmenyertakan's on the motherboard you will be overloaded. Especially if you like the layout memindahmindahkan your PC.
7. Two Options for Video CardIf your video card was a sound that is very disturbing, can do two things to the video card. The easiest way is to quickly replace the whole of your video card with a new one. For example, one video card with passive cooling is the ASUS EAX1600XT good enough. However, money should you spend not a little to make up for a new video card, about U.S. $ 150-US $ 500 and instead may be more than that.
The second way is to replace the default video card heatsink is equipped with a fan of his. Some examples of good heatsink is a product from Arctic Cooling or can you see in the site-cooling.com www.arctic, to find where the heatsink is most suitable for your video card. All you need to remember when replacing the heatsink is the size. Because if it is too large, then the heatsink will automatically cover the empty slot next to the video card and certainly will not be an empty slot you can enable.
8. CRACKLE Hard Drive SilencerHard drive can also cause the sound is quite annoying. The noises occur when the hard drive head is at work coming from the hard drive trying to read the plate in it. Noise also occurs from the round plate in it that causes vibration on the disk itself, and if you are not good notebook PC will cause sound less pleasant to hear. The only way for this is to provide a HDD Cooler is made from aluminum and comes with a pretty good fan.
9. Replacement PSUPSU is also one of the components that cause your PC into a noisy, mainly because it has a blower fan. Currently in most PSU wearFan diameter 12 cm, a very large size. That makes most of the PSU to be noisy. However, if the PSU is providing a controller for the fan, the story would be different. Because then we can control the fan rotation in accordance with our wishes.
As an example of the Antec PSU, which is True Power TPII-380, the power rating of this PSU is 380 watts and has the function of the fan setting alone, the price offered is also quite reasonable at around U.S. $ 75. Very much when compared you buy a PSU with a fanless system (fanless), which currently can be reached at U.S. $ 170.
10. Replacement of the exhaust casingIn every case must have at least an exhaust befungsi to throw the hot air inside the casing and of course set the air circulation inside the casing. Exhaust fan that is usually contained in a standard chassis typically do not have good quality and impressed just improvise it. This is causing the noise from the exhaust fan.
The only way to eliminate the noise is changing with a new fan. For example you could use the Arctic Fan 8L 8 or a diameter of 8 cm at a price of around U.S. $ 6. Rounds that can be generated from this fan with 2000 RPM maximum noise level of only 20.0 dB. However, you need to consider here is the provision of places for additional fans in the casing. First make sure in case you have available places for additional fans.
11. Support Tools for Mute Sound in PCAfter all the components inside your PC is no longer a sound annoying, you can certainly breathe a sigh of relief. But so far our experience, the slightest sound issued from the components inside the PC, his voice will still be heard up to your ears.
To be able to totally eliminate the sound you require additional equipment. One of them using foam silencer must have been widely known by the overclockers and PC enthusiasts. One example of a fairly unknown silencer is the product of Acoustic, namely AcoustiPack, but veryUnfortunately this product does not seem to enter the Indonesian market.
For another alternative, you can search for sound dampening foam on the market Indonesia, indeed the results would not be as much if you use the above product but still will make your PC quieter.
There are several reasons we recommend that you use the sound dampening foam. The first of these sound absorbers capable of absorbing noise arising in the casing so as to prevent noise in the casing out and be heard by your ear and the second is to use this foam vibration is usually felt when the optical drive or hard drive is at work will disappear altogether, so will cause the PC to be quiet and there is no vibration at all when you hold it.
12. Optimal Cooling with Water Cooling SystemJust as the formula applicable, that water is more effective to cool the temperatures are hotter than the air. But certainly for the case of cool PC components, the volume of water needed should not be too much and certainly with the flow of water that is not too fast. To our knowledge, the cooling in this way is the most effective way to reduce heat, let alone water cooling system does not remove noise while working.
There are several concepts of the water cooling system. One that is currently widely applied is by pumping water from the radiator into each water block already installed in the brackish-gmasing components on the PC. The water will be drained from the radiator through several components at once such as processors, video cards and even the motherboard chipset or hard drive (if the water cooling system that provides a lot of water block) and then cool the respective components. After that the water will be re-spun into the radiator. Radiator water cooling system of this type is passive, because it is not equipped with a fan. So despite the rather large size, the radiator is no sound at all. Another concept is the active water cooling system radiator is equipped with a small fan.
We recommend not to choose water cooling system equipped with a fan on the radiator, because it will not affect the performance of water cooling. One example of water cooling system is pretty good we think is a product from Zalman, the Zalman Reserator 1 Plus. But, of course you have to spend up to U.S. $ 240 range. Prices are quite expensive, is not it? Good luck and experiment.
read more...

15 Easy Ways to Take Care Laptop Batteries













For those of you who have high mobility, a laptop would be one of the gadgets you use. Kadan there is something uncomfortable on the laptop, the problem with the battery. These are tips and tricks and how easy caring for your favorite laptop battery. Here are 15 easy ways to do it:
1. Perform Defrag The PeriodicHard drives that work with when work orders are given little will be stored in the drive and battery. This must be stopped because it will make the battery becomes exhausted quickly. To make your hard drive as efficiently as possible then it should be done regularly defrag
2. Dim ScreenMany laptops come with the ability to dim the screen so the battery can be durable. Some come with the ability to modify CPU and cooling mode. Suppress the excessive use of batteries can be done through this way
3. Reduce External DevicesUSB devices like mouse, flash drive, wifi and an external device or other input from the outside can quickly drain your laptop battery. Unplug or disable if external device is unused
4. Adding RAMThis allows you to run more processes with the memory your laptop, instead of relying on virtual memory. The results of the virtual memory uses hard drives, and much less power efficient. It should be noted that adding RAM will consume more energy, so this is an efficient way if you want to run memory intensive programs which actually require heavy usage of virtual memory
5. Run the Hard Drive No CD / DVDAs like the hard drive that requires a lot of power, CD and DVD drives are worse. Even having one in the drive can consume excessive power in the battery. CD and DVD spins, becomes like a hard drive that requires a great power even when they are not active for use. Wherever possible, try to run this process with virtual drives using programs like Alcohol 120% and daemon tools instead of the optical
6. Keeping Contacts Clean Batteries KeepClean your battery's metal contacts every couple of months with a cloth moistened with alcohol. This will make the transfer of power from your battery more efficient
7. Reducing program acting on the BackgroundItunes, Desktop Search, and so forth, all this can increase the CPU load and drain the battery faster. Shut down everything that is not essential to create long-lasting battery
Beri peringkat terjemahan
 
8. Caring for the Battery The Periodic
Do not leave a charged battery dormant for long periods of time. Once charged, you should at least use the battery at least once every two or three weeks. Do not allow Li-On battery completely removed (the release is only for older batteries with memory effects)

9. Use Hibernate mode, Do not Stand By
Although set up the laptop in stand-by mode to save some power and you can immediately use it after you leave, this does not save as much as the hibernate function. Hibernate on the circumstances, the computer will keep your PC and perform perfectly Shut Down

10. Maintain Optimal Fixed Temperature
Your laptop operates more efficiently when it is cold. Cleaning the air vents of your laptop with a clean cloth or keyboard cleaner

11. Organize And Optimize Your Power of Choice
In "Power Options" in the Control Panel window and set it up so that power usage is optimized (select "Max Battery" for maximum effect)

12. Do Processing Command Overstated
Make the process in one application. Do not open the application because it would make too much of your laptop battery run out quickly

13. Note the number of Demand Process On PC
More and more requests from your PC. Passive activities such as e-mail and Word Processing consume much less power than gaming or from a DVD. If you have a single battery charge - pick your priorities wisely

14. autosave function
Ms Word and Excel have an auto save function (automatic storage) but this causes the battery drained faster. At the time of the battery is running low disable the auto save to the laptop and not drop dead of a sudden that makes the laptop easily damaged

15. lowering Graphics
Lowering the graphics used. You can do this by changing the screen resolution and graphics drivers off the excess.
read more...

Thursday, July 28, 2011

Care Tips Laptop Batteries
















Technological developments allow us to do anything anywhere with a variety of portable devices. One Laptop, so now we do not have to just stay at home to do chores, browsing, gaming or anything that can be done by the computer desktop. But there is a shortage of laptop that has a battery life that did not last long. If you take a laptop with a long time and often do, then automatically the battery life will be reduced, as a result we have to buy a new laptop battery.

Well for that I had gone to the streets next to the famous forums, I found an interesting tips to care for laptop batteries. The following tips:
1. Do not store the laptop on the bed / carpet / sofa. Laptops need air circulation because he took out the heat. If we keep the mattress, the heat will not come out.
2. Use a cooling pad. Cooling pad can help reduce the temperature of a hot laptop. Laptop and battery so not hot. Try to find the direction the wind is blowing from the bottom up .. not the direction the wind is down / inhale air.
3. Laptops today are sophisticated. So, if for example, continue until fully charged again, he would break the flow by itself. So no need to lift the adapter.
4. if the laptop ga used in a long time (eg one week) the laptop battery should be kept alone. Store in a plastic dry, continue to store in a cool place. if you can save also some silica gel to prevent moisture.
5. Do not store a laptop or notebook batteries in the car exposed to sunlight. This can affect the performance of the laptop.
6. Calibrate your laptop battery at least once a month. How to calibrate the battery life of laptops up to approximately the remaining 10-15%, then charge until full. This will move all the cells in the battery, so the condition is always excellent.
7. Laptop battery or not to hit let alone fall. Do not also be saved / crushed heavy objects, because it will be vulnerable to short-circuit / short circuit, causing overheating.
8. Avoid contact with water. Know the consequences. Although it will dry and can be used again, mold and corrosion will eat away at the battery itself physically.
9. Always use original batteries and chargers. Of the original more guaranteed quality?
10. if longer use the laptop without the battery, keep the voltage stable electricity in our homes. The trick is to use stabilizer. if no stabilizer, preferably replacing it wrote. Battery is not worth the price of laptop damage! better yet use UPS ... so when a sudden power failure, the laptop is still alive and we still managed to shutdown ..
11. if the laptop is often in on-offkan for, do not shut down is better but in sleep mode only. Because the power needed to light up when the laptop is smaller than the first time turn on the laptop.
12. Use the power management control panel. Set brightness below 50%, do not wear weird screen saver, use blank as the most economical power, set the time as well so that not too long. Sets also so the max battery power.
read more...

Wednesday, July 27, 2011

Laptop Care Tips














Laptops are a highly sensitive electronic items when not guarded well and did not do the treatment correctly then your laptop will often go into the service Laptop.Komponen Laptops are also very expensive in comparison with Components PC.Untuk avoid reaching your pocket money should you do Tips How to care for Laptop below. : ^ _ ^ Hopefully Helpful
01. Do not indiscriminate download free software from the internet.
Moreover such software as if as an antivirus. Use the software that you get from the package you buy a laptop. The risk of the virus can damage your laptop if you carelessly use the software from the Internet. If you still want to use the downloaded software, then make sure you scan it with antivirus software you have.
02. Do not give cover apapapun including gloves Laptops at your laptop turned on because it is based on the experience of my friend's laptop processor laptop will die because there is no air circulation beneath the surface of the Laptop
03. According to the survey, the most common laptop damage occurred on the hard drive and LCD display / screen. Hard drive damage caused by collision or fall. LCD damage is usually due to sun exposure and physical stress.
04. Rapikanlah adapter cables or other cables which are connected with a laptop, do not make others stumble.
05. Besides damage to the hard drive and LCD, liquid spills are causing damage to the most common laptops, or use a sheet of transparent film called 'keyboard protector'.
06. Avoid Vibration and Keep the laptop from the megaphone, for example a loudspeaker, machinery / heavy vehicles, and other vibration sources.
07. Do not expose your laptop from x-ray at the airport.
08. Keep your laptop clean, wipe with a clean cloth or cotton that is free of dust.
09. Protect your laptop modem. Use a modem that has a digital line guard features. Because of this feature will keep the modem from damage when accidentally plugging in the cable modem to a digital PABX telephone jack or ISDN lines. And be careful when going to plug the phone cable to the laptop because the metal wire in a laptop modem connector is very thin and easily bent.
10. In Asia the climate, humid temperatures can be a big problem for laptops that are designed in the United States. To reduce potential problems, make sure the laptop is stored in a dry and cool. If the laptop is not used for a long time, keep the laptop in a tight container and enter the silica gel. Silica gel is as contained in the medicine bottle, the packaging of electronic barang2 (small packet labeled 'Dessicant Silica Gel'). Or it could be bought at the store chemicals. Silica gel is a chemical material characteristic of hygroscopic (absorbs moisture / humidity).
11. Power outages and voltage disturbances can occur at any time, at home, in hotel rooms or in the office. If possible, use the 'surge-protector' if you're using an AC outlet. And do not forget to back up data regularly.
12. Always use a laptop bag while traveling.
13. If you want to wrap your laptop to be sent or for other purposes, use a strong protective box, and wrap in foam or sponge that can absorb vibrations.
14. Never place heavy objects on top of the laptop.
15. If the laptop is in trouble, do not try to disassemble itself. Should submit to a technician or service-center nearest. Because maybe the damage would be even more severe. Especially for a laptop that is under warranty - disassemble the laptop can damage the warranty sticker (warranty seal) which is still attached to the laptop.
16. When will lift the laptop is open, do not lift it while holding on the display / screen, lift the bottom / keyboard
17. Do not insert the diskette in the corners. Insert a floppy half can damage the disk-drive. Likewise, when opening or closing the CD-ROM/DVD-ROM drive tray to insert or eject a disc. Do not touch the lens on the CD-ROM tray. Hold the compact-disc at the edges, not on the disk surface.
18. Do not plug the cable modem laptop on the PBX (private branch exchange) or a digital telephone line. Laptops can only use channels PSTN (public-switched telephone network). The use of phone lines in addition to the PSTN can damage your laptop modem.
19. Take care of laptop batteries, not to leak because it can damage the battery slot.
20. Do not move-move the laptop while still alive. Laptops are meant to live the hard drive is also being worked so that when actuated cause the hard drive heads to scratch the cylinder so it would be fatal.
21. Keep your laptop from strong magnetic fields, liquid fuel and a source of heat / cold or extreme temperature changes.
22. Avoid direct sunlight and make sure the laptop is always placed on a flat surface.
Nb: Warranty Card Missing You Do Until and if there is damage to your laptop Fatal Take it to the store when you buy Laptop first.
read more...

Tuesday, July 26, 2011

10 Antivirus Software of the Year 2011













 














Here is a list of 10 in 2011 Antivirus software according toptenreviews.com
1. BitDefender Antivirus Pro 2011BitDefender Antivirus Pro 2011 has comprehensive features and is very easy to use, a new feature that has antivirus is Serach Advisor, which integrates a built-in browser that will provide protection when browsing on the internet. In addition there are also features of Active Virus Control is designed to detect and mengahapus hidden security threats. Lack of BitDefender Antivirus Pro is using slightly more resources on the computer yet so user will not feel it.



 
read more...

Monday, July 18, 2011

100 Keyboard shortcuts (Windows)














Take advantage of keyboard shortcuts (Keyboard Shortcuts) not only helps you in completing the work faster, but also more efficient. If your daily work relies heavily on the Windows operating system, here are 100 + Keyboard Shortcuts for your Windows.The General Shortcuts
We'll kickoff the list with some really general you That Often used shortcuts.



read more...

How to cope with "USB Device not Recognized"








whether the USB on Windows XP, Vista or 7 is in trouble, so it does not recognize USB device? If so, there's an easy trick that might help.

In general, the reason the USB drive does not work is the cache file to your device get corrupted / error. If you have problems when installing on the device and all of a sudden your USB device stops working, you can delete the cache files that device and it will enable the USB ports working again.
 
read more...

Overcoming the Hidden Files by Virus











You may have experienced data loss in a flash or other USB storage media data after the scan by antivirus? For the layman assumes that the existing data in flash is lost or erased due to infected by a virus (virus locally).

Actually the data is not necessarily lost or erased, but it is hidden (super hidden files) by the virus and the existing data in flash is turned into a good shortcut folder, data Microsoft Office (word and excel) or the other. You can distinguish between original files and shortcuts in Windows Explorer (Type and Size).




read more...