Fix yourself a printer that is broken "Waste ink tank full" CanonType I / Ip Series

Classical damage to the printer brand Canon is dead-total, with the printer light blinks green and orange alternately, when printter used then the error and issue the message "Waste ink tank full". This type of damage is mostly the same, and the cause because the ink waste container "shaped cork "saturated" waste ink tank full ". For the type of Canon printer waste ink reservoir is composed only of cork is usually placed at the bottom of the computer. With the technology flow system or a printer in fancy term infusion, making ease of filling the ink. without fear of running out of ink while printing. Sometimes ink is not flowing, or ink to flow but does not remove the ink print head. The solution to this by doing the cleaning head is usually through mintenance. Actually, by doing cleaning print head we've sucked the ink and if excessive will be wasted in the traps. 

read more...

Caring for LaserJet Printers

Here are some tips for your printers print durable and satisfactory results, especially for species such as the Laser printers: LaserJet 4L, 5L, 6L, 1000, 1010, 1020, 2100, 2200, 4000, 5000 etc..
1. Do not drop pieces "wire strapless" (foreign objects) in the paper tray, or holes in the printer, this caused  heating technology using a plastic film printer (fuser film sleeves), so easily torn by sharp objects, and the resulting paper crumpled and prints some spots. 

read more...

Reset the Epson Stylus C58 Printer

Here's how to reset sequence Epson Stylus C58:

1. The first step must be already installed printer drivers. To download click download drivers Epson drivers.
2. Download the software. Software called Stylus C58 Resetter You can download here Click
3. Change the computer date to 9 November 2006, because this program only road in that date.
4. Run the program by double-clicking resetnya "AdjProg.exe"

read more...

Reset Printer Epson C58

Printer reset can be done through two ways, namely the Manual and Software. The Resetter software can be downloaded from the Internet with Free. Here's how to perform each Reset the Printer:

  

Printer indicator BLINK

 Why should the reset? because the printer Blink often experience that causes the printer can not operate. Usually on the screen, there is a message not recognized etc. catridge. When we see these cases there is no other way other than to reset the printer. Printer reset can be done through two ways, namely the Manual and Software. The Resetter software can be downloaded from the Internet with Free. Here's how to perform each Reset the Printer:

read more...

printer error and solution

Printer HP Deskjet 3600 & 3700 Series Moving Head catridge to right In Hardware / results Moulds Printing Process Held Amid Loss 
SOLUTION:this happens because the encoder strip bar defects / dirty, try cleaning with a clean cloth that has been shed duraklin to remove the ink marks on the plastic encoder strip.

Canon Printer IP 1200, 1300, 1600, 1700, 2200 blinking after the refill catridgeSOLUTION:Press and hold down the reset button 10 seconds and then click ok on the warning / alert indicator on the computer monitor

read more...

Canon Printer IP 1000, IP 1500, I 255, I 320 and Canon Pixma Series interesting paper with imperfect / tilt

SOLUTION:This usually happens because of dirt / foreign objects on the paper guide roll / pick-up roll unit, clean the dirt TSB to paper the perfect rug

read more...

Canon Printer Maintenance Error / Blinking / Light Power + Resume / Ink + Paper on Alternate

SOLUTION:This is caused by the waste ink pad counter is full / full, so the printer stops working, do the waste ink counter reset process through a special software such as a general tool / adjustment program.

Download 

read more...

How to Reset Canon Printer to Eliminate Error Code

Canon printers require the use of reset in a few times. Especially if your printer ink is often leaky, then the reset will mature faster. It is marked by the emergence of Error code E27 and E28 on the printer indicator, the cause for Waste ink absorber full or Platen waste ink absorber is full. The printer can not be used before we do the reset. To reset it is recommended to contact the Canon Service Center, but to save costs we can do it yourself at home.
Here's an example on how to Reset Canon MP 160 or MP 180:
Please reset the Canon software download free at this address: http://www.box.net/shared/4yblbn34kg 

 























copy and open it in computer software, so that software can be detected earlier (MP Tool buttons off) do the following:
1. Unplug Power cable
2. Press and hold down the button "Power" (On / Off)
3. Reinsert the power cable
4. Press the "Reset" and release
5. Release the button "Power"
6. If successful alarm lamp will light (if not repeat again).
7. After that MP Tool software will be detected, now run the software.
The way the above is not fully efficacious, if you want better dismantle your printer and do the cleaning on Waste ink absorber full or Platen waste ink absorber is full of foam that holds the ink in the printer (see the location on your printer's manual). If you do not do this then over time the ink will be more full, any damage to the printer can not be avoided.

read more...

collection of beautiful themes for Windows 7

 

 

 

 

 

 

 

 

 

 

 

Windows 7 Black Themes

Download

read more...

100 beautiful themes for Windows 7

100 Themes For Windows 7

 


 Download

read more...

collection of beautiful themes for windows 7

Download

read more...

Error Repair on Windows 7 with FixWin Utility

Often when we remove the application, we leave the files 'rest' in the registry. This causes the performance of Windows becomes slower or even Windows to be an error. FixWin Utility is a freeware that will help you overcome the problem. FixWin Utility v 1.1 size only 529 kb so it is very light to run. Besides, with its portable, making this application you can take them anywhere, via flash, hard drives and the like.

read more...

Overcoming ERROR 2739 on Windows 7

for those of you who have an internal problem error 2739 on windows seven possible ways this could solve the problem :

1. Click Start> All Programs> Accessories.
2. Right click on the Command Prompt and select Run As Administrator.
    command_prompt
3. For Windows 32 bits go to C: \ Windows \ System32.
    whereas for Windows based 64-bit to go to C: \ Windows \ SysWow64.
    command_prompt2
4. At the prompt, type regsvr32 jscript.dll and press Enter.
     command_prompt3
5. When the dialog "DllRegisterServer in jscript.dll succeeded" appears, and click OK

read more...

Share files on windows 7

Share files on windows 7 adnd windows vista

The following tutorial on file sharing windows 7, Surely this step the computer has been connected in one network. 

read more...

Download Security Update for Windows 7 (KB978542)

Microsoft has recently released a new security update to address security issues that have been identified, which allows an attacker from a distance that is not capable of controlling the computer you are interested in Windows 7.

Update KB978542 for Windows 7 improvements in Outlook Express, Windows Mail and Live mail, if you work with one of the programs mentioned should update the security that has been proclaimed by the microsoft.

These vulnerabilities may cause a remote code execution if the Mail client user visit a malicious mail server set up by an attacker allowing access rights allow the same PC with the user's mail client. Such conditions may have a negative impact if these permissions as an administrator.

Download Security Update for Windows 7 (KB978542)

read more...

Defrag utility in Windows 7

This is very good for you as a user of Windows 7 like defragging parallel (defrag your hard drive that separate the two at once) and progress reports to your computer. Defrag function is to organize and sort your files by type of hard drive files / data in such a way that will ease the process of read / write hard disk and increase the workload will be lighter.

read more...

Recovery mode using the Recovery Console Windows 7

One of the most useful when you use the computer and place the things you do not want on your Windows, of course, can use the Recovery Console, Recovery Console with the way you can make improvements such as repairing the Master Boot Record and Boot Sector of disk for Windows that you have installed.

read more...

differences in Windows 7 64-bit with 32-bit Windows 7

When will you download the Windows 7 may have experienced a little confused, because there is Windows 7 32-bit and 64-bit Windows 7. So which one should be selected and matched with the laptop or computer you have? In addition you may also be a bit confused what's the difference between Windows 7 32-bit with 64-bit Windows 7

read more...

Speeding up boot on windows 7

Surely those of you who used to be accustomed to using windows xp and windows are now switching to seven feel the difference in the length of the boot process on windows seven.The following are simple tips you can apply how to speed up booting in windows seven .

The first step you should do is change the setting konfiguration.Go to command prompt and type msconfig

 












After that will appear the System Configuration dialog window on the image belowAfter leaving the System configuration window, select the Advanced Options button.

.
 











In the window BOOT Advanced System then checks the Number of processors, I happened to use a dual core so I choose number two.

 























Click OK>> Apply>> OK and the process has been completed. After that there is a request to restart the computer, restart it and the booting process you become faster.
Hopefully helpful.

read more...